Justin@VMP
March 22nd, 2007, 10:33 PM
Today mile's finally made the long trip from N. FL to see me. After getting through some issues we finally started running it. Right off the bat 285rwhp at 6-7psi. We wanted to run 14psi but it would not do it, due to wastegate springs or the boost controller, he is looking into it. The 39/42lb blue pencil injectors and 310 pump worked fine.
I moved the IMRC opening point down to 3000rpm but the curves still came out the same way.
I spent some time on my new IMRC split port spark table, I'll be perfecting it this weekend on two other blown 3.8s.
Stock maf in blow through with a diablo mafia worked well.
http://www.vmptuning.com/dynographs/miles3.jpg
I moved the IMRC opening point down to 3000rpm but the curves still came out the same way.
I spent some time on my new IMRC split port spark table, I'll be perfecting it this weekend on two other blown 3.8s.
Stock maf in blow through with a diablo mafia worked well.
http://www.vmptuning.com/dynographs/miles3.jpg