battery relocte

[scorpiocgg]

I have moved my battery to my trunk. I installed a kill switch as per NHRA rules. Do you know how to wire the switch so it will kill the battery and alternator? Thanks for your help.

[Justin@VMP]

I am not sure, as I have not done that mod before. Make sure your run a ground back there too.

[99svt3753]

http://www.kitcarmag.com/howto/cutoff_switch_install/

Not a wiring schematic, but tells you which wires go where.

Basically the two LARGE spades are for the battery leads.

The smaller leads are for the ignition / alternator circuits.

Put a Large ground wire (same gauge as the battery cables or larger) to the frame back there too.

Tim

http://www.flamingriver.com/index.cfm/page/ptype=product/product_id=64/prd64.htm

Please note a resistor must be used with the alternator kill switch to
protect the electrical system.

[Flycaz]

Here....

http://bellsouthpwp2.net/i/_/i_maxwel/2688Slide4-med.jpg