Justin@VMP
July 23rd, 2007, 04:21 PM
To hook a wideband up to the x-cal2 you will need the mini din 9-pin analog input cable (http://www.vmptuning.com/store/index.php?p=product&id=148&parent=2). The male end of the cable goes into the top of the X-cal2, you will cut the female end of the cable off to expose the wires.
http://www.vmptuning.com/sct/x2analog.jpg
I have found that the wire colors inside the cable are not always consistent, you will need to use a multimeter to find out which wire corresponds with analog 1, analog 2, and ground.
The Innovate Motorsports LC-1 or LM-1 wideband will have 2 programmable analog outputs, and an analog ground. You only need one of the analog outputs, you will connect it to analog 1 on the x-cal2 analog input cable. You'll connect the ground wires together. Follow the Innovate Motorsports instructions for analog output wiring.
When you start datalogging with SCT Live Link the Analog 1 parameter will need to be selected from the list of items to datalog. You will need to input a formula into Live Link so the A/F displays properly. Right click Analog 1, and input the formula. If you are using the default analog output formula for the Innovate wideband then enter the following formula into Live Link. For the LC-1 use the formula "V / 0.3324 + 7.35" and for the LM-1 use "V / .5 + 10". You will need to verify that the Live Link software is correctly displaying the A/F. You can do that by comparing it to the screen on the LM-1 or hooking up the serial connection on the LC-1 to your PC and verifying the a/f with the Innovate Log Works software.
You can download the latest SCT programs here:
http://sctflash.com/downloads.php
You can find the SCT Live Link Forum here:
http://www.sctflash.com/forum/forumdisplay.php?f=76
Demo on how to configure and use Live Link for datalogging:
http://www.sctflash.com/docs/live_link_demo.htm
X-Cal2 to Innovate integration article:
http://innovatemotorsports.com/resources/Xcal2_tutorial.php
http://www.vmptuning.com/sct/x2analog.jpg
I have found that the wire colors inside the cable are not always consistent, you will need to use a multimeter to find out which wire corresponds with analog 1, analog 2, and ground.
The Innovate Motorsports LC-1 or LM-1 wideband will have 2 programmable analog outputs, and an analog ground. You only need one of the analog outputs, you will connect it to analog 1 on the x-cal2 analog input cable. You'll connect the ground wires together. Follow the Innovate Motorsports instructions for analog output wiring.
When you start datalogging with SCT Live Link the Analog 1 parameter will need to be selected from the list of items to datalog. You will need to input a formula into Live Link so the A/F displays properly. Right click Analog 1, and input the formula. If you are using the default analog output formula for the Innovate wideband then enter the following formula into Live Link. For the LC-1 use the formula "V / 0.3324 + 7.35" and for the LM-1 use "V / .5 + 10". You will need to verify that the Live Link software is correctly displaying the A/F. You can do that by comparing it to the screen on the LM-1 or hooking up the serial connection on the LC-1 to your PC and verifying the a/f with the Innovate Log Works software.
You can download the latest SCT programs here:
http://sctflash.com/downloads.php
You can find the SCT Live Link Forum here:
http://www.sctflash.com/forum/forumdisplay.php?f=76
Demo on how to configure and use Live Link for datalogging:
http://www.sctflash.com/docs/live_link_demo.htm
X-Cal2 to Innovate integration article:
http://innovatemotorsports.com/resources/Xcal2_tutorial.php